Full Cross-point Analog Video Matrix Switch 16×16 RS-232

50T16-16
Analog Matrix Switcher
with BNC input and output

Category:

In general

This 50T Medium matrix swticher supports 16ch standard definition (CVBS) analog video input and 16ch bnc output, optional keyboard operation, RS232 communcation in computer based software, operation is very stable. Good choice for applications of public transport, education, video display, etc.

Features and function

  • Support HD TV bandwith
  • PC based software by RS232 communication.
  • keys in front panel for operation.
  • Using signal long-distance transmission distortion gain compensation technology;
  • Blue LCD display to display working status;
  • Video input and output by BNC interface;
  • Built-in round-robin switching function, can set any interval time and channel;
  • Built-in scene storage function, can be operated directly in the panel;
  • Power off site switching memory protection function;
  • With RS232 communication interface.

 

Rear panel

Specifications

Video
Bandwidth 200MHz (-3dB),full load, @±0.1dB at 0-10MHz and @±0.6dB
Luminance and chromaticity interference  <-80dB @100KHz (full load)
Signal formats  NTSC3.58, NTSC4.43, PAL, SECAM, HDTV
signal type composite video signal
video input
Interface  BNC connector
Impedance  75Ω
Minimum and maximum levels  Analog signal 0.5V – 2.0Vp-P
Echo phase locking  0.3V – 0.4Vp-P
Return loss  <-50dB @5MHz
Maximum tributary offset error 15mV
Video output
Interface  BNC connector
Impedance  75Ω
Return loss  <-50dB @5MHz
Dc compensation up to ±5mV
Conversion type Vertical interval
Control type
Serial control interface RS232
Baud rate and protocol Baud rate: 9600, Data bits: 8 bits,Stop position: 1,There is no parity check bit
Serial control port structure 2=TX, 3=RX, 5=GND
In general
Power supply 12V – 36V DC
Temperature Storage and usage temperature: 20 °C – 70 °C
Humidity Storage and usage humidity: 10% – 90%
Size 491.5 (L)*210.0 (D)*96.0mm (H)
Gross/Net weight 5.2KGS/4.0KGS